Шаг 8: Настраиваем VPN
#cd /usr/ports/net/mpd4
#make install clean
Правим mpd.conf
cd /usr/local/etc/mpd4
ee mpd.conf
————————
default:
load client1
load client2
client1:
new -i ng0 pptp1 pptp1
set ipcp ranges 10.100.100.1/32 10.100.100.10/32
load client_standard

client2:
new -i ng1 pptp2 pptp2
set ipcp ranges 10.100.101.1/32 10.100.101.10/32
load client_standard

client_standard:
set iface disable on-demand
set iface enable proxy-arp
set iface idle 0
set iface enable tcpmssfix
set bundle enable multilink
set link yes acfcomp protocomp
set link enable no-orig-auth
set link enable keep-ms-domain
set link no pap chap
set link enable chap
set link yes chap-msv1 chap-md5 chap-msv2
set link mtu 1460
set link keep-alive 10 60
set ipcp yes vjcomp
set ipcp dns 8.8.8.8
# set ipcp nbns 192.168.1.4
set bundle enable compression
set ccp yes mppc
set ccp yes mpp-e40
set ccp yes mpp-e128
set ccp yes mpp-stateless

ee mpd.secret
alex 123456 10.100.100.10/32
crazy testing123 10.100.101.10/32
В mpd.links
pptp1:
set link type pptp
set pptp self 10.100.100.1
set pptp enable incoming
set pptp disable originate
set pptp disable windowing
set pptp enable always-ack

pptp2:
set link type pptp
set pptp self 10.100.100.1
set pptp enable incoming
set pptp disable originate
set pptp disable windowing
set pptp enable always-ack

В rc.conf
mpd_enable=»YES»
reboot )))
Шаг Ч
Ставим анализатор рогов под lightsquid
Cd /usr/ports/www/lightsquid
Make install clean

На этом END )))